CS22 D Transmitter

Transmitter with display for monitoring refrigerants


If toxic and flammable gases and vapors need to be monitored outside Ex zones, the CS22 D transmitter is a reliable and economical solution. The CS22 D transmits measured values and status notifications on an analog (0.2-1 mA or 4-20 mA) or digital (RS-485) signal, while also displaying them on site. In the event of an alarm, it will warn everyone in the vicinity using its internal buzzer. In combination with GfG's reliable controllers, it can be installed in new gas detection systems or retrofitted into existing ones.

The CS22 D uses chemisorption (CS) to detect flammable and toxic gases such as ammonia, methane and numerous refrigerants. The current measured value is indicated on the 2.2-inch display, which lights up red in the event of an alarm. The long-life sensors make the CS22 D an economical solution for detecting a wide range of gases in measuring ranges such as 0 to 5,000 ppm, 0 to 100 LEL or 0 to 1 % by volume. Its automatic temperature compensation and the linearization of the measurement signals ensure high measurement accuracy.

Functional safety and device protection
The hardware of the CS22 D complies with the European Functional Safety Standard DIN EN 61508-2: 2011 (SIL). The housing is protected against the ingress of dust and water (protection class: IP54). An optional weatherproof housing provides additional protection.

Communication and service
Signals are transmitted via the analog industrial standard (optionally 0.2-1 mA or 4-20 mA) or the digital RS-485 interface (Modbus protocol). The CS22 D uses two status LEDs to indicate its operating status. Service and adjustments can be carried out on site with an intuitive built-in button interface (one-person adjustment). The multicolor backlit display shows the current measured value, status messages and the CC22 D's menu. Test gases for function tests can be inserted with a calibration adapter.


Key features at a glance:


General information:

  • Measuring principle: Chemisorption (CS)
  • For toxic and flammable gases and vapors
  • Expected sensor lifetime: 5 years
  • 2.2-inch color display, built-in button interface, buzzer
  • Signal transmission: 0.2-1 mA / 4-20 mA / RS-485
  • Protection class: IP54

Approvals / Certifications:

  • SIL 2/3 (hardware)

Optionally available:

  • RC22 operating unit, weatherproof housing, calibration adapter

Detectable gases

n-Hexane 0 to 100 % LEL
R-23 0 to 1000 ppm
R-1234yf 0 to 1000 ppm
R-1234ze 0 to 1000 ppm
R-134a 0 to 1000 ppm
0 to 2000 ppm
0 to 5000 ppm
R-404A 0 to 1000 ppm
0 to 2000 ppm
R-407C 0 to 1000 ppm
R-410A 0 to 1000 ppm
R-438A 0 to 1000 ppm
R-448A 0 to 1000 ppm
R-449A 0 to 1000 ppm
R-454B 0 to 1000 ppm
0 to 2000 ppm
R-507[A] 0 to 1000 ppm
R-717 (ammonia) 0 to 300 ppm
0 to 1000 ppm
0 to 3000 ppm
0 to 1,000 % by volume
Other gases on request.

Downloads

Extensions and accessories

Weatherproof housing


Weatherproof housing for various transmitters
» more

Test gases


You can find an overview of our test gases here
» more

Accessories CS22 D


Here you'll find the complete list of accessories for the CS22 D
» download PDF

Our experts are happy to answer your questions! How to find us